Machine was manufactured at +GF+ in Nidau, Switzerland

CONTROL

Heidenhain iTNC 530 with Ethernet and electronic handwheel for part setup

WORKING RANGE

Longitudinal X-Axis……………………………….   31.5″ (800 mm)

Cross Y-Axis……………………………………..         23.6″ (600 mm)

Vertical Z-Axis…………………………………..         19.7″ (500 mm)

B-Axis (Swivel)…………………………………           +30/-110 degrees

C-Axis (Rotary)………………………………….            n x 360 degrees

Number of simultaneous axis………………………   5/5 simultaneous

FEED DRIVE

Feed Rate X/Y/Z……………………………..   1,653 IPM (42 m/min)

Feed Rate B-Axis (Swivel)………………………………..   200 RPM

Feed Rate C-Axis (Rotary)………………………………..   360 RPM

Acceleration X/Y/Z……………………………….   up to 17 m/sec2

DIRECT DRIVE WORK TABLE

Pallet Clamping Surface……   11.02″ x 11.02″ (280 mm x 280 mm) pallets

Maximum workpiece weight (manual loading)………….   264 lbs (120 kg)

Maximum workpiece weight (automatic with pallet changer)    198 lbs (90 kg)

Max pallet size possible for this machine    13.8″ x 13.8″ (350 x 350 mm)

Pallet type this machine is equipped with    System 3R Dynafix 280 x 280 mm

Number of pallets this machine is equipped with…………..   7 pallets

NOTE optional pallets sized 350 x 350 mm NOT included with this machine

With hydraulic clamping in turning and swivelling axis

All feed motors are liquid-cooled

Direct measuring system Heidenhain rotary encoders

AUTOMATION

Tool Magazine automatic tool changer………………….           50 positions

Laser tool measuring system……………………………..               Standard

Infrared parts measuring touch probe………………………….   M&H

Automatic pallet changer number of pallets……………….        7 pallets

WEIGHT

Including pallet changer………..   Approximately 20,282 lbs (9,200 kg)

Machine base…………………..   Polymer concrete (man made granite)

SPINDLE

Spindle taper…………………………………………..   HSK A63

Spindle RPM………………………………………….     24,000 RPM

Spindle power 40% ED……………………………..   29.5 HP (22 kW)

Spindle torque 40% ED………………………….        33.9 Ft/Lb (46 Nm)

EQUIPPED WITH:

153 gallon (580 l) coolant Tank with paper filtration system & 70 bar CTS

Chip conveyor for higher demands

Tool cleaning by air blast

Direct measuring system Heidenhain glass scales X/Y/Z

Stock at European Machine Tools Wisconsin,

F.O.B: European Machine Tools Wisconsin

European Machine Tools

SHOP & SHOW ROOM

W300 N7672 Christine Lane # 600, Hartland 53029, Wisconsin U.S.A

SERVICE & SALES – SPECIALIST IN 5 AXIS MACHINE TOOLS

SALES & SERVICE PARTNER ALZMETALL GERMANY

EUROPEAN MACHINE TOOLS | P:262-327-0800 | http://WWW.EUROPEANMACHINETOOL.COM

| HARTLAND | WI |