1 Pre Owned ROEDERS RXP400 Linear

1 Pre Owned ROEDERS RXP400 Linear

1 Pre Owned ROEDERS RXP400 Linear

Manufacturer: Roeders RXP400 Linear Status: Available
Location: EMT Hartland Spindle: 40,000
Inventory Number: 62216-1 Number of Axis: 3
Year: 2012   


2012 ROEDERS RXP 400 High Speed 3-Axis Vertical Machining Center:

Machine built in Soltau, Germany in 2012; first installed new in US 3/2013

High speed milling machine with high stiffness for highest precision and
surface quality in three linear axes. The NC control has been developed
especially for high dynamics in 3D milling operations.

Patented friction-freee weight counterbalance in teh Z-axis for optimal

Intel Pentium based Roeders High Speed CNC control RMS6

Work-piece table with T slot configuration

Spindle 3000 to 40,000 RPM, type MFW1024/40 HSK-E32
-Includes automatic tool change capability
-Maximum tool diameter 0.400in (10 mm)
-Includes greased bearings with automatic lubrication
-Fully integrated into machine control
-Equipped for HSK 32 tool interface

Laser tool length measuring device
-For automatic tool length, diameter, custom taper and contour measurement
with breakage and wear control
-Fully integrated into RMS6 CNC control
-Safely hidden in sealed tool changer compartment

Automatic tool cleaning station
-Compressed air-blast cleaning of cutting tool before laser measurement
-Tool moves to the cleaning station automatically when the CLEAN cycle is

Work piece cleaning
-Pressure air jet for cleaning of the work piece by air, integrated into
the Z-axis

Hand held pendant
-For manual operation of the axes during set-up, includes override control

-Program editor for modifying and creating NC programs
-Includes the following features: Syntax highlighting, tool for file
comparison, tool for simple file modification, special search functions

-Ethernet network connection
-1GBit/sec; Interface for the integration of the machine control into an
Ethernet-network by the customer

Chip Removal
-Collecting bin below the machine bed

Automatic tool changer, RXP400
-Tool changer capacity: 18 positions, HSK 32. Includes collision detection

Rotary door for the tool changer
-Rotary door for the tool changer for manual tool change during production

3-D Touch Probe (Manual)
-Fixture with collet for probe and reference pin included

Automation package (RXP200-600)
-Includes automatic door for robot loading and un-loading
-Includes DIO card for connection to an external loading system

-Includes Roeders Job Manager (standard version) for the operation of a
single machine, with or without handling for tools and workpieces

-Includes software interface for connecting the Roeders machine control
(RMS6) to an external handling system from: Roeders, System 3R, Erowa,
Fanuc, and Zimmer+Kreim
-Includes the following interfaces: Work piece changing is possible with
a single gripper

High Accuracy Package
-Measurement of spindle growth with non-contact sensor
-Fully integrated into the machine control

Chuck drive single-2 pieces
-Includes pneumatic control of a single automatic chuck with clamping
check, chuck needs to be ordered through Roeders. When a handling system
is used, the chuck will be controlled by the handling system

Work Envelope
X axis………………………………………….. 16.1″ (410 mm)
Y axis………………………………………….. 11.8″ (300 mm)
Z axis…………………………………………… 8.3″ (210 mm)

Table Dimensions
X………………………………………………. 17.1″ (450 mm)
Y………………………………………………. 11.8″ (300 mm)

Max. Workpiece Weight
220 lbs. (100 kg)

Axis Drive Motors
Linear Motors in all three axis, water cooled

Deutsche Starr super precision linear guides with recirculating roller
bearings, standard cooling of bearings

0-1575 IPM (40M/min) on all 3 axes

Machine Weight
7,040 lbs. (3,200 kg)

Machine Dimensions (including control cabinet)
8′ wide, 6.3′ deep, 6.8′ high

Max. Ambient Temperature Allowed
95 degrees F

All machine components are protected against contamination. With an
industrial vacuum cleaner, graphite, cast iron and plastic can be

Fully enclosed, two doors with safety glass, good view into the working
area, simple work piece loading by crane is possible. For the automated
loading of the machine an automatic door is available on request

Chiller for tempering of the spindle, drives and cabinet

PC based control uses two Pentium 3.2 GHz level computers

17″ flat screen monitor

Control operates under Windows XP

Easy to learn, user friendly Windows interface

1 Gigabyte RAM (more RAM available on request)

250 Gigabyte hard drive (larger drives available on request)

Industry leading 10,000 block look ahead

CNC control automatically assign best acceleration/deceleration based on
cutter path geometry

Standard CNC can control up to 5 axes simultaneously

PLC interface allows for easy connection of accessories

Software axis limit switches

Built in “post” postprocessor allows Roeders control to run CAM files
configured for other machines control formats without requiring
“reposting” for Roeders format

User can control which G and M codes to disregard when running part files

Machine history file stores ongoing machine history information: name of
file run, when it was run, total run time, error codes, etc.

Automatic 2D cutter radius compensation with collision detection

Automatic 3D cutter radius compensation (CAD file must give XYZ of tool
tip and tool vector)

Automatic sister tool function changes tools during operation (based in
cut distance)

Machine is Loaded with many OPTIONS MUST SEE.

400V /10 KVA

18A / 32A

Machine Weight 7500 Lbs

Approx.: W: 8’ x D: 6.3’ x H : 6.8’

Feel free to call us or Visit us and see this Machine under Power Wisconsin Hartland

262-327-0800 Sales