Used DECKEL MAHO DMGMORI-DMU 50 eVolution 5-Axis VMC MillPlus CNC Heidenhain

Used DECKEL MAHO DMG-DMUMORI 50 eVolution 5-Axis VMC MillPlus CNC Heidenhain

Specifications
Manufacturer: DMG Deckel Maho Inventory Number: 4919-1
Number of Axis: 5 Axis Spindle Taper: 40 Taper
Model: DMU50 EVO Spindle: 18,000 RPM
Features

Used  DECKEL MAHO DMG-DMU 50 eVolution 5-Axis  VMC:

Machine was manufactured in Seebach, Germany

-Clamp once, machine 5-Sides-

Table on machine swivels 0-180 degrees and rotates 360 degrees which

allows for 5-Axis simultaneous machining with one work piece clamping.

HEIDENHAIN /MillPlus CNC control with electronic handwheel

-WORK AREA-

Traverse path X (longitudinal)……………………..   19.7″ (500 mm)

Traverse path Y (across)…………………………..       16.5″ (420 mm)

Traverse path Z (vertical)…………………………..      15″ (380 mm)

-MAIN DRIVE-

AC-motor spindle drive power 100% DC……………….   33.5 HP (25 kW)

AC-motor spindle drive power 40% DC………………..   46.9 HP (35 kW)

Spindle speed……………………………………..   20-18,000 rpm

Spindle taper……………………………………………   40 Taper

Number of gear steps……………………………………….   None

Max Spindle Torque………………………….. 95.9 Ft/Lbs (130 Nm)

Spindle Bearing Diameter……………………………   3.15″ (80 mm)

-FEED DRIVES-

Rapid traverse linear axes X/Y/Z…………….   1,968.5 ipm (50 m/min)

Feed Range linear axes X/Y/Z………………….   787.4 ipm (20 m/min)

-TOOL MAGAZINE-

Storage pockets…………………………………….      32 positions

Maximum tool weight……………………………..   13.22 lbs (6 kg)

Maximum tool diameter without vacant places…………..   3.15″ (80 mm)

Maximum tool diameter with vacant places…………….      4.13″ (105 mm)

Maximum tool length………………………………                       11.02″ (280 mm)

Chip to chip time…………………………   Approximately 6 seconds

-MEASURING SYSTEM-

Direct, Heidenhain glass scales, resolution 0.00004″ for X/Y/Z

Heidenhain direct angle encoders for B & C Axes

-NC SWIVEL ROTARY TABLE-

Clamping surface……………………..   19.7″ x 15.0″ (500 x 380 mm)

Swivel range 5th (swivel) B-axis…………………….   0-180 degrees

Rotation range 4th (rotary) C-axis   0-360 degrees (continous, full 4th)

Rapid traverse, (swivel) B-axis……………………………   26 rpm

Rapid traverse, (rotary) C-axis……………………………   33 rpm

Maximum table load………………………………   441 lbs (200 kg)

Table measuring system…….   Direct path measuring system in both axes

Table cooling…….   Drive cooling for B and C axis with heat-exchanger

Table swivel time, horizontal/vertical…….   Approximately 1.5 seconds

-EQUIPPED WITH-

BLUM laser tool measuring of tool length, diameter,& broken tool detection

Chip Conveyor

Fully enclosed cabin

IKZ Tank 600L,Coolant Thru.

Laser.

T-Probe.

All Books on Hand.

Level Shoes.

PLUS STATE & LOCAL TAXES, IF APPLICABLE, SUBJECT TO PRIOR SALES ,

AS IS,NO WARRANTY.

SUBJECT TO PRIOR SALES PRE-OWNED MACHINE TOOLS,

TECH INFO SUBJECT TO VERIFICATION BY BUYER.

Option:

MultiTap Transformer: $1.775.-

European Machine Tools

SHOP & SHOW ROOM

Hartland 53029, Wisconsin U.S.A

SERVICE & SALES – SPECIALIST IN 5 AXIS MACHINE TOOLS

Dir: 262-327-0800