Used DECKEL MAHO DMG-DMU 80monoBLOCK Full 5-Axis Machining Center

Used DECKEL MAHO DMG-DMU 80monoBLOCK Full 5-Axis Machining Center

Used DECKEL MAHO DMG-DMU 80monoBLOCK Full 5-Axis Machining Center

Specifications
Manufacturer: Deckel Maho DMGMORI Model: DMU80MB
Number of Axis: 5 Axis Inventory Number: 72018
Control: TNC530i 3D Smart TNC   
Features

Used  DECKEL MAHO DMG-DMU 80monoBLOCK Full 5-Axis Machining Center.

This One:POWER:40HP

Only approx:4K .Hr. PGM run.

MUST SEE THIS MACHINE BIG SAVINGS.

Made in Pfronten, Germany, this is a Full 5-Axis Simultaneous machine

Heidenhain iTNC530 CNC control with 15″ TFT screen & Electronic Handwheel

-WORKING RANGE-

Traverse path X axis (longitudinal)………………..   34.65″ (880 mm)

Traverse path Y axis (transverse)………………….   24.80″ (630 mm)

Traverse path Z axis (vertical)……………………       24.80″ (630 mm)

-MAXIMUM WORK PIECE DIMENSIONS-

34.65″ (880 mm) diameter x 30.71″ (780 mm) height x 1,433lb (650 kg)weight

-FEED DRIVES-

Type……………………………………….   Brushless AC/Digital

Rapid traverse linear axes X/Y/Z………………   1,181 ipm (30 m/min)

Ballscrews X/Y/Z………………….   50 x 20 mm/50 x 20 mm/63 x 20 mm

-TOOL MAGAZINE-

Application…………………………………………..                      Vertical

Type of Gripper…………………………………………                 Pick Up

Number of Tool Stations………………………………………    32

Max Tool Weight………………………………….                       17.6 lbs (8 kg)

Max Tool Diameter without free side pockets…………..   3.15″ (80 mm)

Max Tool Diameter with free side pockets…………….       5.12″ (130 mm)

Max Tool Length…………………………………..   12.4″ (315 mm)

-HEIDENHAIN GLASS SCALES X/Y/Z AXES DIRECT PATH MEASURING SYSTEM-

Input Resolution……………………………………….   0.001 mm

-HEIDENHAIN ROTARY ENCODERS B/C AXES DIRECT PATH MEASURING SYSTEM-

Input Resolution……………………………………….   0.001 mm

 

-EQUIPPED WITH-

Fully enclosed protection cabin

Integrated NC Rotary Table 4th Axis

Table Clamping Surface……………….           27.56″ (700 mm) Diameter

Maximum Table Load………………………..   1,433 lbs (650 kg)

Rigid Table Clamping Surface..                    49.21″ x 27.56″ (1,250 mm x 700 mm)

Maximum Table Revolution………………..   30 rpm

10,000 RPM Motor Spindle with Active Cooling

Type of Main Drive……………………..   AC controlled digital

Drive Power 100% DC……………………………   40 HP (30 kW)

Max Spindle Torque 100% DC………………..   211 Ft/Lb.

Speed Range…………………………………..           20-10,000 RPM

Number of gear steps…………………………        None

Spindle Taper……………………………………….   CAT 40

Spindle bearing diameter front/rear……..     3.15″/3.15″ (80/80 mm)

NC-Controlled Swivel Milling Head (B-Axis) 5th Axis with Active Cooling

Swivel Range 150 Degrees(0 is Vertical/-90 is Horizontal) -120/+30Degrees

Rapid traverse of the B-Axis is 35 rpm, swivelling time approx. 1.5 sec

158 gallon (600 liter) high pressure coolant tank with paper band filter

580 PSI (40 bar) coolant thru the spindle centre

Chip conveyor

External flood coolant on outside of spindle

14.5 PSI (1 bar) pressure, 10.6 gallon/min (40 l/min) flow rate

Infrared parts measuring touch probe

Weight of machine approximately 21,062 lbs

Total load at machine base including work-piece weight approx 23,046 lbs

Approximately 4,206 original spindle on hours total!

Changing Daily/Under Power@E.M.Tool Shop WI.

European Machine  Tools.LLC

www.europeanmachinetool.com

262-327-0800

Pre-owned CNC Machining  Centers

5 Axis, 3 & 4 Axis ,Turning & Millturns

Hartland  Wisconsin  53029 USA

Used Machines are subject to prior sales

as is no warranty, technical information’s

are subject to verification by buyer.