Used 2005 DECKEL MAHO DMC100U duoBLOCK 5-Axis w/RS 4 Rotary Pallet Storage

Used 2005 DECKEL MAHO DMC100U duoBLOCK 5-Axis w/RS 4 Rotary Pallet Storage

Specifications
Manufacturer: Deckel Maho DMG Status: SOLD
Control: TNC530 Heidenhain Tool Changer: 120 Posi.
Number of Axis: 5 Axis   
Features

Used 2005 DECKEL MAHO DMC100U duoBLOCK 5-Axis w/RS 4 Rotary Pallet Storage

Inspect machine in plant under power by appointment.

Machine was made in Pfronten, Germany

This machine is capable of simultaneous 5-axis and 5-sided machining

because of the universal swivel head which moves continuously between

vertical and horizontal spindle positions.

HEIDENHAIN iTNC530 CNC Control with software option ATC

-WORKING RANGE-

X axis (longitudinal)…………………………….   39.4″(1,000 mm)

Y axis (transverse)………………………………   39.4″(1,000 mm)

Z axis (vertical)………………………………..   39.4″(1,000 mm)

-WORKING TABLE (6 PALLETS) NC ROTARY TABLE-

NC rotary table clamping surface…..   39.4″ x 31.5″ (1,000 mm x 800 mm)

NC rotary table maximum load………………….   3,310 lbs (1,500 kg)

Rotation range of table…………   360 x 0.001 degrees (full 4th axis)

-5TH AXIS MILLING SPINDLE-

NC Controlled B axis milling head. 2 seconds swivel time Horiz.-Vertical

Head swivels from horizontal to vertical & vertical to horizontal position

In addition head has a NC Controlled swivel range from vertical position

0 degrees to the left -10 degrees (in direction of tool magazine) and to

the right to horizontal position +180 degrees=3D190 degrees total swivel

range

-MAIN SPINDLE DRIVE-

Type………………………………………   AC controlled/digital

Power 40% duty cycle (S3)…………………………   37.5 HP (28 kW)

Power 100% duty cycle (S1)………………………..   25.5 HP (19 kW)

Speed range (spindle)………………………………   20-18,000 rpm

Acceleration/Deceleration time………………………..   2.2 seconds

Maximum spindle torque………………………..   89.2 ft/lb (121 Nm)

Spindle taper…………………………………………….   CAT40

-FEED DRIVES-

Type……………………………………….   Brushless AC/Digital

Feed rate………………………………………….   2,362.2 ipm.

Rapid feed…………………………………………   2,362.2 ipm.

-120 POSITION TOOL CHANGER-

-COOLANT PUMP-

Pump output external jets………   10.6 gallon/minute (40 liter/minute)

Pump pressure external jets……………………   21.76 PSI (1.5 bar)

Pump output chip rinsing……..   47.55 gallon/minute (180 liter/minute)

Tank volume……………………………….   238 gallon (900 liter)

-COOLANT THRU THE SPINDLE-

Pressure…….   1,160 PSI (80 bar) or 580 PSI (40 bar)-2 pressure steps

Form………………………………………   Centre of the spindle

-EQUIPPED WITH-

Automatic pallet changer with 6 pallets total

BLUM Laser tool length measuring and broken tool detection

HEIDENHAIN TS 641 infrared parts measuring probe

Spray pistol with pump

Available books, manuals, documentation

Subject to prior sales as is no warranty,

Specifications subject to verifications by buyer

European Machine Tools

SHOP & SHOW ROOM

W300 N7672 Christine Lane # 600, Hartland 53029, Wisconsin U.S.A

SERVICE & SALES – SPECIALIST IN 5 AXIS MACHINE TOOLS

EMTLLC@ATT.NET

Dir: 262-327-0800