Used 03/04 DECKEL MAHO DMG-DMU 50 eVolution 5-Axis Simultaneous VMC:

Used 03/04 DECKEL MAHO DMG-DMU 50 eVolution 5-Axis Simultaneous VMC:

Used 03/04 DECKEL MAHO DMG-DMU 50 eVolution 5-Axis Simultaneous VMC:

Specifications
Manufacturer: DMG MORI Inventory Number: 925171
Status: SOLD Tool Changer: 30
Spindle: 18,000RPM Number of Axis: 5 Axis
Spindle Taper: 40 Taper   
Status: SOLD   
Features

Used 03/04 DECKEL MAHO DMG-DMU 50 eVolution 5-Axis Simultaneous VMC:

Machine runs Aerospace parts Aluminum everyday high Precision-Parts.

SPECIAL PRE-REMOVAL Price,

Machine was manufactured in Seebach, Germany

-HISTORY-

Build date for this machine was 2003

First installed new 2004

-Clamp once, machine 5-Sides-

Table on machine swivels 0-180 degrees and rotates 360 degrees which

allows for 5-Axis simultaneous machining with one work piece clamping.

HEIDENHAIN MillPlus IT CNC control with electronic handwheel

-WORK AREA-

Traverse path X (longitudinal)……………………..   19.7″ (500 mm)

Traverse path Y (across)…………………………..   16.5″ (420 mm)

Traverse path Z (vertical)…………………………..   15″ (380 mm)

-MAIN DRIVE-

AC-motor spindle drive power 100% DC……………….   33.5 HP (25 kW)

AC-motor spindle drive power 40% DC………………..   46.9 HP (35 kW)

Spindle speed……………………………………..   20-18,000 rpm

Spindle taper……………………………………………   CAT 40

Number of gear steps……………………………………….   None

Max Spindle Torque………………………….. 95.9 Ft/Lbs (130 Nm)

Spindle Bearing Diameter……………………………   3.15″ (80 mm)

-FEED DRIVES-

Rapid traverse linear axes X/Y/Z…………….   1,968.5 ipm (50 m/min)

Feed Range linear axes X/Y/Z………………….   787.4 ipm (20 m/min)

-TOOL MAGAZINE-

Storage pockets…………………………………….   32 positions

Maximum tool weight……………………………..   13.22 lbs (6 kg)

Maximum tool diameter without vacant places…………..   3.15″ (80 mm)

Maximum tool diameter with vacant places…………….   4.13″ (105 mm)

Maximum tool length………………………………   11.02″ (280 mm)

Chip to chip time…………………………   Approximately 6 seconds

-FLOOD COOLANT-

Amount of coolant……………………………   52.8 gallons (200 l)

Flow rate………………………..   5.28 gallon/minute (20 l/minute)

-MEASURING SYSTEM-

Direct, Heidenhain glass scales, resolution 0.00004″ for X/Y/Z

Heidenhain direct angle encoders for B & C Axes

-NC SWIVEL ROTARY TABLE-

Clamping surface……………………..   19.7″ x 15.0″ (500 x 380 mm)

Swivel range 5th (swivel) B-axis…………………….   0-180 degrees

Rotation range 4th (rotary) C-axis   0-360 degrees (continous, full 4th)

Rapid traverse, (swivel) B-axis……………………………   26 rpm

Rapid traverse, (rotary) C-axis……………………………   33 rpm

Maximum table load………………………………   441 lbs (200 kg)

Table measuring system…….   Direct path measuring system in both axes

Table cooling…….   Drive cooling for B and C axis with heat exchanger

Table swivel time, horizontal/vertical…….   Approximately 1.5 seconds

-EQUIPPED WITH-

BLUM laser tool measuring of tool length, diameter,& broken tool detection

Chip Conveyor

RENISHAW infrared parts measuring probe

Fully enclosed cabin

PLUS STATE & LOCAL TAXES, IF APPLICABLE, SUBJECT TO PRIOR SALES ,

AS IS,NO WARRANTY.

European Machine Tools

SHOP & SHOW ROOM

Hartland 53029, Wisconsin U.S.A

SERVICE & SALES – SPECIALIST IN 5 AXIS MACHINE TOOLS

SALES & SERVICE PARTNER ALZMETALL GERMANY

EMTLLC@ATT.NET

Dir: 262-327-0800