ONE USED +GF+ MIKRON UCP 600U VARIO 5-AXIS AUTOMATED MACHINING CENTER:

ONE USED +GF+ MIKRON UCP 600U VARIO 5-AXIS AUTOMATED MACHINING CENTER:

ONE USED +GF+ MIKRON UCP 600U VARIO 5-AXIS AUTOMATED MACHINING CENTER:

Specifications
Manufacturer: GF MIKRON Spindle Taper: HSK63A
Number of Axis: 5 AXIS Inventory Number: 572020
Control: TNC530 HEIDENHAIN   
Features

1 Pre Owned MIKRON VARIO 600 5 axis. WITH-OUT PALLET CHANGER.

Under Power at EUROPEAN MACHINE TOOLS IN WISCONSIN.

AVAL.in June/July2020

first in. 2009

Maint. are done on this machine.

Comes with Installations.

Approx::Machine has low Hr.

Build in  in Switzerland.

Machine made in Nidau, Switzerland CONTROL Heidenhain iTNC 530

with Ethernet and electronic handwheel for part setup

WORKING RANGE Longitudinal X-Axis………………………………                          23.6″ (600 mm)

Cross Y-Axis…………………………………….                                                                      17.7″ (450 mm)

Vertical Z-Axis………………………………….                                                                      17.7″ (450 mm)

B-Axis (Swivel)………………………………..                                                                       -115/+30 degrees

C-Axis (Rotary)…………………………………                                                                      n x 360 degrees

FEED DRIVE Feed Rate X/Y/Z………………………………                                             590 IPM (15 m/min)

Rapid Speed X/Y/Z…………………………….                                                                     866 IPM (22 m/min)

Rapid Speed B-Axis (Swivel)………………………………                                                   25 RPM

Rapid Speed C-Axis (Rotary)………………………………                                                  33 RPM WORKING TABLE

Clamping Surface………………….                                                                                       450mm

Maximum workpiece weight (manual loading)…………                                              441 lbs (200 kg)

All feed motors are liquid-cooled Direct measuring system Heidenhain rotary encoders AUTOMATION

Automatic tool changer………………………………                                                               30 positions

BLUM Laser tool measuring system………………..

included Infrared parts measuring touch probe

Approximately                                                                                                                        16,976 lbs (7,700 kg)

Machine base………………….. Polymer concrete (man made granite)

STEPTEC SWISS MADE SPINDLE Spindle taper…………………………………………..  HSK A63 Spindle

RPM………………………………………….                                                                                    20,000 RPM

EQUIPPED WITH:

7 Palett – System

Complete machine enclosure

Pallet changer Dynafix 280×280

Max 350x350mm

Chip conveyor Spray gun Direct.

Measuring system.

Heidenhain glass scales X/Y/Z, Encoders B,C 7 (seven)

Coolant tank with filter

T-Probe-Prep.only

Tool-Laser.

Books.

Level Shoes.

Water Tank.

Machine Light.

Chip.-COnv.

Hand Wheel.

EMT.262.327.0800