One Pre – Owned 2003 DMG GILDEMEISTER CTX420 linear CNC lathe with C & Y Axis
Machine was built at GILDEMEISTER Drehmaschinen GmbH in Bielefeld, Germany
Only 9,507 original spindle on hours as of 9/2020
P:262.327.0800
-CONTROL-
SIEMENS 840D powerline
-WORKING RANGE-
Maximum swing diameter……………………………….. 26.8″
Swing diameter over X guideway……………………… 22.2″
Transverse travel (X)………………………………………. 7.3″
Longitudinal travel (Z)……………………………………… 25″
Vertical travel Y-Axis…………………………. Plus or Minus 1.6″
-MAIN SPINDLE-
Type of drive…………………………… Integrated spindle motor
Flat flange spindle nose……………………………….. 170h5 mm
Bar capacity………………………………………………. 2.6″
Spindle diameter in front bearing………………… 4.7″
Chuck………………………………………………… Up to 10″
Drive power, 40% DC/cont. duty………………….. 46.9/33.5 hp (AC)
Maximum torque, 40% DC/cont. duty…………… 270.1/197.1 ft/lbs
Speed range……………………………………….. 20-5,000 rpm
-COUNTER SPINDLE-
Type of drive…………………………… Integrated spindle motor
Flat flange spindle nose……………………………….. 140h5 mm
Spindle bore………………………………………………. 2.2″
Spindle diameter in front bearing…………………… 3.5″
Chuck……………………………………………….. Up to 6.3″
Drive power, 40% DC/cont. duty………………….. 42.9/33.5 hp (AC)
Maximum torque, 40% DC/cont. duty………………146/116.8 ft/lbs
Speed range……………………………………….. 20-7,000 rpm
-FEED DRIVE AC-
Rapid traverse X/Z………………………………. 2,362/1,771 ipm
-TURRET-
Number of tool stations………………………………….12
Shank diameter to DIN 69880………………………… 1.6″
Number of driven tool stations………………………..12
Drive power 40% DC of driven tool stations………………..17.7 hp
Maximum torque of driven tool stations………………… 20.4 ft/lbs
Maximum speed of driven tool stations…………………… 4,500 rpm
Maximum clamp diameter of driven tools………………….0.8″
-HYDRAULIC UNIT-
Capacity…………………………………. 13.2 gallon (50 liter)
Pressure, maximum…………………….725.2 psi (50 bar)
-COOLANT EQUIPMENT-
Capacity……………………………….. 46.23 gallon (175 liter)
Pump power…………………………….0.85 kW
Pump nominal delivery at 5 bar………….. 7.92 gallon/min (30 l/min)
-COMPRESSED AIR CONNECTION-
Pressure, minimum………………………………87 PSI
-EQUIPPED WITH-
Chip conveyor
Oil mist extractor
LNS QUICKLOAD SERVO S2 bar loader with manual control pendant
Bar machining package consisting of:
-Hollow clamping cylinder
-Parts catcher
-Interface for bar loading magazine
-Conveyor for finished parts
Various assortment of spindle liners…. 9/16″ smallest, 2-3/8″ largest
Various assortment of WTO made in Germany live tool holders
Tool measuring arm
SMW/KNCS 225-65mm chuck on main spindle
SMW/KNCS 140-35mm chuck on sub spindle
Machine weight 14,300 lbs
Options we can offer :
Transformer
Install
Transport
PLUS STATE & LOCAL TAXES, IF APPLICABLE
SUBJECT TO PRIOR SALES
EMT STOCK