One used 2001 DMG DECKEL MAHO DMU80P hi-dyn 5-Axis Universal Machining Center

One used 2001 DMG DECKEL MAHO DMU80P hi-dyn 5-Axis Universal Machining Center

One used 2001 DMG DECKEL MAHO DMU80P hi-dyn 5-Axis Universal Machining Center

Specifications
Manufacturer: Deckel Maho Inventory Number: 81617
Number of Axis: 5 Axis Control: 430 TNC
Spindle: 12000RPM Spindle Taper: HSK63A
Features

One used 2001 DMG DECKEL MAHO DMU80P hi-dyn 5-Axis Universal Machining Center                                                                                                                                                          

Made in Pfronten, Germany                                                                                                                           

Low spindle on hours total (subject to change daily)                                                                                

Heidenhain TNC 430 CNC Control with electronic handwheel & Ethernet plug                                                                           

-DESIGN CONCEPT-                                                         

This is a UNIVERSAL machining center meaning it is two machines in one:  

both a vertical AND horizontal machining center. The universal milling   

head on this machine is automatic and programmable. It can be swivelled in

4 seconds from vertical to horizontal, and in combination with the rotary

swivel table makes 5-sided 5-axis machining in a single set up possible.                                                                          

Setup time is reduced, the need for multiple setups is eliminated and    

accuracy and precision are improved. The P Series machines are intended  

for fully automatic manufacturing of highly complex workpieces in a single

set up. Ideal for both small and large batches with the high production  

components including high pressure CTS (Coolant Thru The Spindle) and    

chip conveyor.                                                                                                                              

-WORKING RANGE-                                                          

X axis (longitudinal)……………………………..   31.5″ (800 mm)

Y axis (transverse)……………………………….   27.6″ (700 mm)

Z axis (vertical)…………………………………      23.6″ (600 mm)

                                                                         

-NC SWIVEL ROTARY TABLE-                                                 

Clamping surface………………………….   24.8″ diameter (630 mm)

Maximum table load……………………..   1,320 lbs (600 kg)

Rapid speed rotary axis………………….   9.3 rpm

Rapid speed swivel axis………………….   7.3 rpm

Rotation range………………….   360 x 0.001 degree (Full 4th axis)

Swivel angles    To spindle -45 degrees, from working spindle +30 degrees

                                                                          

-AUTOMATIC UNIVERSAL MILLING HEAD-                                       

Automatic swivel from horizontal to vertical in approximately 4 seconds. 

The auto swivel head makes this machine 2 machines in one because both   

vertical and horizontal machining is possible with one workpiece clamping.

Together with the NC Swivel Rotary table 5-Sided, 5-Axis simultaneous    

machining is possible with one workpiece clamping.                       

                                                                          

-MAIN DRIVE-                                                             

Type………………………………………   AC controlled/digital

Power 40% duty cycle (S3)…………………………   37.5 hp (28 kW)

Power 100% duty cycle (S1)………………………..   25.5 hp (19 kW)

Spindle speed range………………………………..       20-12,000 rpm

Number of gear steps………………………………….   None

Maximum spindle torque…………………………         95 ft/lbs (121 Nm)

Spindle bearing diameter front………………………   3.15″ (80 mm)

Spindle taper……………………………………………        HSK63A

Clamping force………………………………………..         2,250 lbs

                                                                         

-FEED DRIVES-                                                            

Type……………………………………….        Brushless AC/Digital

Feed rate (x-y-z)…………………..              0.04-590 ipm (1-15,000 mm/min)

Rapid feed (x-y-z)………………………….   131 ft/min (40 m/min)

Feed power (x-y-z)………………………..   2,250 lbs

Anti-collision clutch……………………….   z

Ballscrew thread x/y/z…………..   1.6 x 0.8/1.6 x 0.8/1.6 x 0.8 inch

                                                                         

-60 POSITION TOOL CHANGER-                                                

Magazine type……………………   Chain, horizontal, double gripper

Number of pockets……………………………………………   60

Maximum tool weight……………………………….   22 lbs (10 kg)

Maximum tool diameter with no neighbouring empty pockets…   4″ (102 mm)

Maximum tool diameter with neighbouring empty pockets….   6.3″ (160 mm)

Maximum tool length……………………………….   13.8″ (350 mm)

Tool change time………………………..   Approximately 5.5 seconds

Chip-to-chip time CAT40    Approximately 15 seconds vertical, 6.5 sec horiz

                                                                         

-HEIDENHAIN GLASS SCALES X/Y/Z AXES DIRECT PATH MEASURING SYSTEM-        

Input Resolution……………………………………….   0.001 mm

                                                                         

-HEIDENHAIN ROTARY ENCODERS B/C AXES DIRECT PATH MEASURING SYSTEM-       

Input Resolution……………………………………….   0.001 mm

                                                                         

-EXTERNAL FLOOD COOLANT PUMP ON OUTSIDE OF SPINDLE-                      

Pump output external jets flow rate    10.6 gallon/minute (40 l/min), 1.5 bar

Coolant tank capacity…………………………..   50 gallon (189 l)

                                                                         

-INTERNAL HIGH PRESSURE COOLANT SUPPLY THRU THE SPINDLE (40 BAR CTS)-    

Coolant tank capacity………………………….   160 gallon (606 l)

Pump output thru the spindle…………….   6 gallon/minute (23 l/min)

Coolant pressure………………………………..   580 PSI (40 bar)

                                                                          

-EQUIPPED WITH-                                                          

Fully enclosed protection cabin                                          

Oil mist extractor                                                       

Preparation (only) for Renishaw MP10 infrared parts measuring probe      

Chip conveyor                                                            

BLUM Laser Tool Measuring of tool length and diameter                    

                                                                          

-DIMENSIONS AND WEIGHT OF MACHINE-                                       

Transport dimensions, approximately………   10’9″ L X 10’4″ W X 8’2″ H

Transport weight, approximately………………   21,504 lbs (9,754 kg)

 

European Machine Tools

SHOP & SHOW ROOM

W300 N7672 Christine Lane # 600, Hartland 53029, Wisconsin U.S.A

SERVICE & SALES – SPECIALIST IN 5 AXIS MACHINE TOOLS

SALES & SERVICE PARTNER ALZMETALL GERMANY                              

P: 262-327-0800