One Pre Owned DECKEL MAHO DMC64V linear drive Vertical Machining Center

One Pre Owned DECKEL MAHO DMC64V linear drive Vertical Machining Center

 

One Pre Owned DECKEL MAHO DMC64V linear drive Vertical Machining Center

Specifications
Manufacturer: Deckel Maho DMG Inventory Number: 11416
Status: On Hold. Model: DMC64 V Linear X
Tool Changer: 30 Year: 2005/2006
Control: TNC530 Heidenhain   
Features

One Pre Owned DECKEL MAHO DMC64V linear drive Vertical Machining Center.

TNC530 Heidenhain Control.

Under Power European Machine Tools Wisconsin.

Test: Geom. & Ball-Bar.

Made in Geretsried, Germany.

HEIDENHAIN iTNC530 Control with Ethernet & Electronic Handwheel.

-HIGHLIGHTS-

Linear drive (no ballscrew) in the X-Axis with rapid traverse of 2,755 ipm

30 position pick-up tool changer which can be loaded during machining time

Tool changer is located behind working area to protect from emulsion & dirt

Direct measuring system (Heidenhain glass scales) for maximum accuracy

15″ TFT flat screen on HEIDENHAIN iTNC530 Control

Year: 2005 /2006

-WORKING RANGE-

X axis…………………………………………..   25.2″ (640 mm)

Y axis…………………………………………..   23.6″ (600 mm)

Z axis…………………………………………..   19.7″ (500 mm)

-FEED-

Feed force X/Y/Z………………………………………..   7,000 N

Feed rate………………………..   0.04-1,575 ipm (1-40,000 mm/min)

Rapid traverse X/Y,Z…….   2,755 ipm (70 m/min) No ballscrew in X-Axis

Rapid traverse Y-Axis………………………..          1,575 ipm (40 m/min)

Rapid traverse Z-Axis………………………..          1,575 ipm (40 m/min)

Ball screw diameter/pitch (Y/Z)……………….   1.57/0.6″ (40/15 mm)

-ACCELERATION-

X-axis…………………………………………………   5 m/s-2

Y-axis…………………………………………………   4 m/s-2

Z-axis…………………………………………………   5 m/s-2

-HEIDENHAIN GLASS SCALES X/Y/Z PATH MEASURING SYSTEM (RESOLUTION)-

Direct………………………………………………..      0.001 mm

-MAIN SPINDLE-

Speed range………………………………………..            12,000 rpm

Drive power 40% DC/continous duty…………..    25.5/

Torque 40% DC/continous duty…………….            73/51.1 ft/lbs

Tool mounting …………………..                                   CAT 40

Tool clamping force……………..                                  8,000 N

Tool releasing force……………..                                   13,000 N

-PICK-UP TOOL MAGAZINE/CHANGER-

Number of tools……………………………………………..      30

Maximum tool diameter………………………………           3.9″ (100 mm)

Maximum tool diameter, vacant adjacent places…..    5.5″ (140 mm)

Maximum tool length……………………………….                11.8″ (300 mm)

Maximum tool weight………………………………                 15.4 lbs (7 kg)

Maximum loading weight of tool magazine…………….   198 lbs (90 kg)

Chip to chip time…………………………   Approximately 7 seconds

-TABLE DESIGN-

Clamping area with T-slots DIN 650-14..                 33.5″ x 23.6″ (850 mm x 600 mm)

Loading height (upper edge of table)………………..   33.5″ (850 mm)

Maximum work load capacity……………………..          1,320 lbs (600 kg)

Coolant Tank – Chip – Pan

Pump capacity external tool cooling   10.6 gallon/min (40 l/min)29PSI(2 bar)

Pump capacity for flushing of bed/magazine door   23.7gal/min(90l/min)1.9bar

-EQUIPPED WITH-

HEIDENHAIN iTNC530 CNC Control with 15″ TFT flat screen monitor

Linear drive in X axis.

Auto Air Blow TC-Change.

Fully enclosed work cabin.

Books.

Level-Shoes.

Ethernet Conec.

RS232 Conec.

Specifications are subject to verfication by buyer.

APPROXIMATE WEIGHT #21,000 LBS

F.O.B:EMT.LLC WI.

EUROPEAN MACHINE TOOLS.LLC