In Excellent condition, Very Clean Machine “LIKE NEW MUST SEE.”
One used 2014 GROB G350 Simultaneous 5-Axis Universal Machining Center
May be inspected in plant under power by appointment
This machine was manufactured at GROB-WERKE GmbH in Mindelheim, Germany
-Approximately 7,636 original spindle on hours over the life of the machine
-Was used exclusively on aluminum molds for finishing work
Slides
Working travels on X/Y/Z axis: 23.6” (600 mm) / 33.7” (855 mm) / 31.6” (805 mm)
Speeds (maximum) on X/Y/Z axis: 2560/1650/3540 inch/min
Accelerations (maximum) on X/Y/Z axis: 276 in/s2
Feed force (maximum) on X/Y/Z axis: 1800 lb
Main spindle
Tool holder for short hollow taper tools to DIN 69 893: HSK-A63
Spindle bearing diameter of front bearing: 2.56 inch
Speed maximum: 28,000 rpm
Drive power maximum at 100% / 40% D.C. : 53/71 hp (40/53 kW)
Spindle torque maximum at 100% / 40% D.C. : 35/46 lb/ft
Chip-to-chip-time: 4.0 sec
Spindle is equipped with optional GROB Spindle Diagnosis (GSD)
Spindle is equipped with optional compressed air supply through the spindle
Disc Tools Magazine
Tool holder: HSK-A63
Standard number of pockets: 40
Tool length maximum: 14.3 inch (365 mm)
Tool diameter maximum no diameter restriction for neighboring positions: 2.8 inch
Tool diameter maximum diameter restrictions for neighboring positions: 6.3 inch
Tool weight maximum: 18 lb
Tool moment in gripper maximum: 8.8 lb/ft
Tilting/Rotary table (A/B-axis) with T-slots
Max Table loads: 840 lb
Table diameter: 22.44” (570 mm)
Maximum interference diameter: 23.6” diameter
A-Axis (swiveling): -185 to +45 degrees
A-Axis speed: 35 rpm max
B-Axis (rotary): n x 360 degrees
B-Axis speed: 50 rpm max
Type of drive: Torque motor
Table has Pneumatic Package with 4x fluid connections including rotary distributor in B-axis rotary table
Control
HEIDENHAIN iTNC 530 with options:
Optimizing the machine kinematics using the “KinematicOpt”
HR520 hand-held controller
Integrated coolant system
Filling volume: 158.5 gallons
Has optional high pressure Internal Coolant Supply 4-38 bar / 58-551 PSI thru the spindle coolant
External Coolant Supply max. 36.5 PSI @ 13.2 gal/min
Chip disposal
Chip dump height: 43.3 inch
Cooling
Cooling capacity: 16,051 btu/hr
Connection rating
Power requirement at 480 V 3-phase / 60 Hz: 42 kVA
Weight
Total weight: 28,700 lbs
Equipped with
Chip conveyor
Hydraulic system
Cooling unit for spindle, rotary table (B-axis), Z-axis feed drive and electrical cabinet
Tool cleaning device by air blast
M&H infrared probe
Washing gun
Air gun
Mist collector, 800 m-3/h
Oil skimmer for coolant lubricant care
3D Machine model
Tool cleaning by air blast
Direct measuring system Heidenhain glass scales X/Y/Z/C/B
Diagnosis system for motor Spindle
Pneumatic package with connectors.
Opti.Machine Kinamatics.
Remote machine diagnosis
One copy technical documentation printed in ring binders
HEIDENHAIN glass scales and HEIDENHAIN rotary encoders X/Y/Z/A/B
P:262-327-0800
SPECIFICATIONS ARE SUBJECT TO VERIFICATION.
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS
FOLLOWING, WE OFFER FOR YOUR CONSIDERATION
European Machine Tools
SHOP & SHOW ROOM
Hartland 53029, Wisconsin U.S.A
SPECIALIST IN 5 AXIS MACHINE TOOLS
Dir: 262-327-0800