DECKEL MAHO DMG-DMU80T 4-AXIS Universal Machining Center

DECKEL MAHO DMG-DMU80T 4-AXIS Universal Machining Center

DECKEL MAHO DMG-DMU80T 4-AXIS Universal Machining Center

Specifications
Manufacturer: Deckel Maho Tool Changer: 30
Spindle: 12000 Number of Axis: 3+1
Spindle Taper: HSK63A Year: 03/04
Features

1 Pre Owned  DECKEL MAHO DMG-DMU80T 4-AXIS Universal Machining Center:

Machine made in Pfronten, Germany

HEIDENHAIN Millplus iT control with 15″ TFT screen & Electronic Handwheel

2003/2004

Low Hr,5700

-WORK AREA-

Traverse path X (longitudinal)……………………..   34.6″ (880 mm)

Traverse path Y (across)…………………………..        24.8″ (630 mm)

Traverse path Z (vertical)…………………………         24.8″ (630 mm)

 

-FEED DRIVES-

Type……………………………………….   Brushless AC/Digital

Rapid traverse linear axes X/Y/Z………………   1,181 ipm (30 m/min)

Ballscrews X/Y/Z………………….   50 x 20 mm/50 x 20 mm/63 x 20 mm

 

-TOOL MAGAZINE-

Application…………………………………………..   Vertical

Type of Gripper…………………………………………   Pick Up

Number of Tool Stations………………………………………   32

Max Tool Weight………………………………….   17.6 lbs (8 kg)

Max Tool Diameter without free side pockets………….. 3.15″ (80 mm)

Max Tool Diameter with free side pockets…………….   5.12″ (130 mm)

Max Tool Length…………………………………..   12.4″ (315 mm)

 

-HEIDENHAIN GLASS SCALES X/Y/Z AXES DIRECT PATH MEASURING SYSTEM-

Input Resolution……………………………………….   0.001 mm

-HEIDENHAIN ROTARY ENCODERS B/C AXES DIRECT PATH MEASURING SYSTEM-

Input Resolution……………………………………….   0.001 mm

-EQUIPPED WITH-

Fully enclosed protection cabin

Rigid Table

Rigid Table Clamping Surface….  49.2″ x 27.6″ (1,250 mm x 700 mm)

Rigid Table maximum load…………………..   1,543 lbs (700 kg)

 

12,000 RPM Motor Spindle with Active Cooling

Type of Main Drive………………………………………   AC

Drive Power 100% DC………………………….   13.4 HP (10 kW)

Drive Power 40% DC…………………………..   20.1 HP (15 kW)

Max Spindle Torque 100% DC………………..   64.2 Ft/Lb. (87 Nm)

Max Spindle Torque 40% DC………………..   95.9 Ft/Lb. (130 Nm)

speed Range…………………………………..   20-12,000 RPM

Acceleration from 0-12,000 RPM……………………..   2 Seconds

Number of gear steps…………………………………..   None

Spindle Taper……………………………………….   HSK-63

Spindle bearing diameter front/rear……..   3.15″/2.16″ (80/55 mm)

 

NC-Controlled Swivel Milling Head (B-Axis) with Active Cooling

Swivel Range (0 is Vertical/12,1/91.1 degrees

BLUM Laser tool measuring   tool length, diameter & broken tool detection

RENISHAW infrared parts measuring probe

Chip auger

External flood coolant on outside of spindle

1 bar (14.5 PSI) pressure, 40L/Min (10.6 gallon/min) flow rate

250L (66 gallon) capacity coolant tank

Smog-Hog

European Machine Tools

Hartland WI,

Under Power :Yes

Books:Yes

SHOP & SHOW ROOM