2 x SOLD Pre Owned MIKRON HSM600U 5-Axis Machining Center with 7 APC:

2x Pre Owned MIKRON HSM600U 5-Axis Machining Center with 7 APC:

2x Pre Owned MIKRON HSM600 5-Axis Machining Center with 7 APC:

Specifications
Status: 2 x Sold Manufacturer: GF Mikron
Inventory Number: 43181-2 Spindle: 24000
Number of Axis: 5 Axis Model: HSM600U
Control: TNC530 Heidenhain Spindle Taper: HSK63A
Location: Wisconsin   
Features

2 x Pre Owned MIKRON HSM600U Vario 5-Axis Machining Center with 7 APC:

2 x SOLD

1 x HSM 600U On Hold for our Customer.

Machines with Torque Tables.

OPTIONS:Installation , Trucking, Transformers, Training please Call European Machine Tools.

BallBar Test , Laser Test Ask for Information.

Low Spindle Hour machines.

FOB: European Machine Tools : Stock Hartland WI,

HSM600U

CONTROL

Heidenhain iTNC 530 with Ethernet and electronic handwheel for part setup

 

WORKING RANGE

Longitudinal X-Axis……………………………….   31.5″ (800 mm)

Cross Y-Axis……………………………………..        23.6″ (600 mm)

Vertical Z-Axis…………………………………..      19.7″ (500 mm)

B-Axis (Swivel)…………………………………        +30/-110 degrees

C-Axis (Rotary)………………………………….        n x 360 degrees

Number of simultaneous axis………………………   5/5 simultaneous

 

FEED DRIVE

Feed Rate X/Y/Z……………………………..   1,653 IPM (42 m/min)

Feed Rate B-Axis (Swivel)………………………………..   200 RPM

Feed Rate C-Axis (Rotary)………………………………..   360 RPM

Acceleration X/Y/Z……………………………….   up to 17 m/sec2

 

DIRECT DRIVE WORK TABLE

Standard Pallet:

Clamping Surface…………………   11.02″ x 11.02″ (280 mm x 280 mm)

Maximum workpiece weight (manual loading)………….   264 lbs (120 kg)

Maximum workpiece weight (automatic with pallet changer)   198 lbs (90 kg)

Optional:

Max pallet size possible for this machine   13.8″ x 13.8″ (350 x 350 mm)

Pallet type this machine is equipped with   System 3R Dynafix 280 x 280 mm

Number of pallets this machine is equipped with…………..   7 pallets

NOTE optional pallets sized 350 x 350 mm NOT included with this machine

With hydraulic clamping in turning and swivelling axis

All feed motors are liquid-cooled

Direct measuring system Heidenhain rotary encoders

AUTOMATION

Tool Magazine automatic tool changer………………….            50 positions

Laser tool measuring system……………………………..               Standard

Infrared parts measuring touch probe………………………….   M&H

Automatic pallet changer number of pallets……………….      7 pallets

WEIGHT

Including pallet changer………..   Approximately 20,282 lbs (9,200 kg)

Machine base…………………..         Polymer concrete (man made granite)

SPINDLE

Spindle taper…………………………………………..      HSK A63

Spindle RPM………………………………………….        24,000 RPM

Spindle power 40% ED……………………………..     29.5 HP (22 kW)

Spindle torque 40% ED………………………….         33.9 Ft/Lb (46 Nm)

EQUIPPED WITH:

153 gallon (580 l) coolant Tank with paper filtration system & 70 bar CTS

Chip conveyor for higher demands

Tool cleaning by air blast

Direct measuring system Heidenhain glass scales X/Y/Z

PLUS STATE & LOCAL TAXES, IF APPLICABLE

TERMS Payment in full via wire transfer prior to removal 

SUBJECT TO PRIOR SALES AS IS No Warranty

Specifications are subject to verifications by buyer 

Installation , Trucking, Transformers, Training please Call European Machine Tools.

FOB: Hartland WI, European Machine Tools Shop . 

P:262-327-0800

European Machine Tools

SHOP & SHOW ROOM

W300 N7672 Christine Lane # 600, Hartland 53029, Wisconsin U.S.A

SERVICE & SALES – SPECIALIST IN 5 AXIS MACHINE TOOLS

SALES & SERVICE PARTNER ALZMETALL GERMANY                              

EMTLLC@ATT.NET 

Sales&Service Dir: 262-327-0800