1x Used DECKEL MAHO DMG-DMU 50 eVolution 5-Axis

1x Used DECKEL MAHO DMG-DMU 50 eVolution 5-Axis

 

1x Used DECKEL MAHO DMG-DMU 50 eVolution 5-Axis

Manufacturer: Deckel Maho Model: DMU50 Evo
Spindle: 18,000 RPM Number of Axis: 5 axis
Control: Heidenhain Millplus Status: SOLD
Tool Changer: 60 posi.   
Specifications

1x Used DECKEL MAHO DMG-DMU 50 eVolution 5-Axis

“” MUST SEE  “”

Made: Germany  2001                                             

machine 5 Sides Machining                                           

Table on machine swivels 0-180 degrees and rotates 360 degrees which     

allows for 5-Axis simultaneous machining with one work piece clamping.

Heidenhain Millplus CNC control,with electronic handwheel

-WORK AREA-                                                               

Traverse path X (longitudinal)……………………..   19.7″ (500 mm)

Traverse path Y (across)…………………………..        16.5″ (420 mm)

Traverse path Z (vertical)…………………………..      15″ (380 mm)                                                                        

-MAIN DRIVE-                                                             

AC-motor spindle drive power 100% DC……………….   33.5 HP (25 kW)

AC-motor spindle drive power 40% DC………………..   46.9 HP (35 kW)

Spindle speed……………………………………..                       20-18,000 rpm

Spindle taper……………………………………………                CAT 40

Number of gear steps……………………………………….       None

Max Spindle Torque…………………………..                         95.9 Ft/Lbs (130 Nm)

Spindle Bearing Diameter……………………………              3.15″ (80 mm)                                                                         

-FEED DRIVES-                                                            

Rapid traverse linear axes X/Y/Z…………….                        1,968.5 ipm (50 m/min)

Feed Range linear axes X/Y/Z………………….                       787.4 ipm (20 m/min)                                                                         

-TOOL MAGAZINE-                                                          

Storage pockets…………………………………….                          60 positions

Maximum tool weight……………………………..                        13.22 lbs (6 kg)

Maximum tool diameter without vacant places…………..   3.15″ (80 mm)

Maximum tool diameter with vacant places…………….       4.13″ (105 mm)

Maximum tool length………………………………                         11.02″ (280 mm)

Chip to chip time…………………………                                       Approximately 6 seconds                                                                        

-FLOOD COOLANT-                                                          

Amount of coolant……………………………                                 52.8 gallons (200 l)

Flow rate………………………..                                                      5.28 gallon/minute (20 l/minute)                                                                     

-MEASURING SYSTEM-                                                       

Direct, Heidenhain glass scales, resolution 0.00004″ for X/Y/Z           

Heidenhain direct angle encoders for B & C Axes                                                                                                   

-NC SWIVEL ROTARY TABLE-                                                 

Clamping surface……………………..                                          19.7″ x 15.0″ (500 x 380 mm)

Swivel range 5th (swivel) B-axis…………………….                 0-180 degrees

Rotation range 4th (rotary) C-axis    0-360 degrees (continous, full 4th)

Rapid traverse, (swivel) B-axis……………………………          26 rpm

Rapid traverse, (rotary) C-axis……………………………          33 rpm

Maximum table load………………………………                        441 lbs (200 kg)

Table measuring system…….   Direct path measuring system in both axes

Table cooling…….   Drive cooling for B and C axis with heat exchanger

Table swivel time, horizontal/vertical…….   Approximately 1.5 seconds                                                                          

-EQUIPPED WITH-                                                          

BLUM laser tool measuring of tool length, diameter,& broken tool detection                                                                        

PRODUCTION PACKAGE consisting of:                                        

580 PSI (40 Bar) Coolant Thru the Spindle .                           

Chip Conveyor .

Blum Laser .                                                     

Touch – Probe Renishaw .

Level Shoes .

Multi Tap Transformer incl.(US)

In Stock European Machine Tools

Wisconsin

Subject to prior sales

as is no warranty

Under Power: Yes Hartland Wisconsin EMT.LLC Shop