1x Pre Owned GF MIKRON VARIO 600 5 axis. WITH 7 STATION PALLET CHANGER.

1 Pre Owned MIKRON VARIO 600 5 axis. WITH-PALLET CHANGER.

Under Power .

Approx::Machine has low Hr.

Inst: Build date:09 in Switzerland.

2017 New Ball Screws and Table adjust Service done,in A1 Excellent condition.

Machine made in Nidau, Switzerland CONTROL Heidenhain iTNC 530

with Ethernet and electronic hand wheel for part setup

WORKING RANGE Longitudinal X-Axis……………………………… 23.6″ (600 mm)

Cross Y-Axis……………………………………. 17.7″ (450 mm)

Vertical Z-Axis…………………………………. 17.7″ (450 mm)

B-Axis (Swivel)……………………………….. -115/+30 degrees

C-Axis (Rotary)………………………………… n x 360 degrees

FEED DRIVE Feed Rate X/Y/Z……………………………… 590 IPM (15 m/min)

Rapid Speed X/Y/Z……………………………. 866 IPM (22 m/min)

Rapid Speed B-Axis (Swivel)……………………………… 25 RPM

Rapid Speed C-Axis (Rotary)……………………………… 33 RPM WORKING TABLE

Clamping Surface…………………. 450mm

Maximum workpiece weight (manual loading)………… 441 lbs (200 kg)

All feed motors are liquid-cooled Direct measuring system Heidenhain rotary encoders AUTOMATION

Automatic tool changer……………………………… 30 positions

BLUM Laser tool measuring system………………..

included Infrared parts measuring touch probe

Approximately 16,976 lbs (7,700 kg)

Machine base………………….. Polymer concrete (man made granite)

STEPTEC SWISS MADE SPINDLE Spindle taper………………………………………….. HSK A63 Spindle

RPM…………………………………………. 20,000 RPM

EQUIPPED WITH:

Chip conveyor Spray gun Direct.

Measuring system.

Heidenhain glass scales X/Y/Z, Encoders B,C 7 (seven)

Coolant tank with paper band filter.

7 Pallet System

T-Probe

Tool-Laser.

Books.

Level Shoes.

Water Tank.

Machine Light.

Chip.-Conv.

Hand Wheel.

EMT.262.327.0800

TERMS Payment in full via wire transfer prior to removal

SUBJECT TO PRIOR SALES AS IS. No Warranty.

Specifications are subject to verification’s by buyer.

European Machine Tools.LLC