1 x Pre Owned 2002 DECKEL MAHO DMC125U LS5 hi-dyn 5-AXIS UNIVERSAL MACHINING CENTER

1 x Pre Owned 2002 DECKEL MAHO DMC125U LS5 hi-dyn 5-AXIS UNIVERSAL MACHINING CENTER

1 x Pre Owned 2002 DECKEL MAHO DMC125U LS5 hi-dyn 5-AXIS UNIVERSAL MACHINING CENTER

Specifications
Manufacturer: Deckel Maho Status: SOLD
Tool Changer: 180 Spindle: 18,000RPM
Spindle Taper: HSK63A Number of Axis: 5 Axis
Control: Heidenhain MillPlus CNC Model: DMC125U Hi-Dyn
Features

Used 2002 DECKEL MAHO DMC125U LS5 hi-dyn 5-AXIS UNIVERSAL MACHINING CENTER:

Machine made in Pfronten, Germany

This machine is capable of simultaneous 5-axis and 5-sided machining

because of the universal swivel head which moves continuously between

vertical and horizontal spindle positions.

HEIDENHAIN MillPlus iT CNC Control with electronic handwheel

-WORKING RANGE-

X axis (longitudinal)……………………………   49.2″ (1,250 mm)

Y axis (transverse)……………………………….   34.6″ (880 mm)

Z axis (vertical)…………………………………      31.5″ (800 mm)

 

-MAXIMUM WORKPIECE CONTOUR AND HEIGHT FROM TABLE SURFACE-

Maximum diameter………………………………..   49.2″ (1,250 mm)

Maximum height…………………………………   48.42″ (1,230 mm)

Maximum weight………………………………   3,307 lbs (1,500 kg)

 

-WORKING TABLE (7 PALLETS) NC ROTARY TABLE-

NC rotary table clamping surface…..   39.4″ x 31.5″ (1,000 mm x 800 mm)

NC rotary table maximum load………………….   3,307 lbs (1,500 kg)

Rotation range of table…………   360 x 0.001 degrees (full 4th axis)

**Has clamping hydraulics for working table**

 

-5TH AXIS MILLING SPINDLE-

NC Controlled B axis milling head. 4 seconds swivel time Horiz.-Vertical

Head swivels from horizontal to vertical & vertical to horizontal position

In addition head has a NC Controlled swivel range from vertical position

0 degrees to the left -7 degrees (in direction of tool magazine) and to

the right to horizontal position +180 degrees=3D187 degrees total swivel

range

 

-MAIN SPINDLE DRIVE-

Type………………………………………   AC controlled/digital

Power 40% duty cycle (S3)…………………………   37.5 HP (28 kW)

Power 100% duty cycle (S1)………………………..   25.5 HP (19 kW)

Speed range (spindle)………………………………   20-18,000 rpm

Acceleration/Deceleration time………………………….   2 seconds

Maximum spindle torque………………………….   89 lb ft (121 Nm)

Spindle bearing diameter front/rear………….   3.15″/2.16″ (80/55 mm)

Spindle taper…………………………………………..   HSK-A63

Clamping power…………………………………………….   8 kN

 

-FEED DRIVES-

Type……………………………………….   Brushless AC/Digital

Feed rate………………………….   0.04-590 IPM (1-15,000 mm/min)

Rapid feed (x-y-z)…………………………..   1,574 IPM (40 m/min)

Acceleration (x-y-z)……………………………   4.5/3.5/6.0 m/s-2

Feed power (x-y-z)………………………………………..   10 kN

Ballscrews x/y/z…………………………….   50×20/40×20/40×20 mm

 

-180 POSITION TOOL CHANGER-

Number of pockets…………………………………………..   180

Maximum tool weight………………………………..   22 lb (10 kg)

Maximum tool diameter without free pockets…………..   3.94″ (100 mm)

Maximum tool diameter with free pockets………………   6.3″ (160 mm)

Maximum tool length………………………………   17.72″ (450 mm)

 

-COOLANT PUMP-

Pump output external jets………   10.6 gallon/minute (40 liter/minute)

Pump pressure external jets……………………   21.76 PSI (1.5 bar)

Pump output chip rinsing……..   47.55 gallon/minute (180 liter/minute)

Tank volume……………………………….   238 gallon (900 liter)

 

-COOLANT THRU THE SPINDLE; WITH COOLANT TEMPERING-

Pressure…………………………………….   1,450 PSI (100 bar)

Form………………………………………   Centre of the spindle

 

-WEIGHT-

Machine weight with table and pallet changer….   32,187 lbs (14,600 kg)

Load on machine base including 2 x workpiece weight   35,494 lbs (16,100 kg)

 

-EQUIPPED WITH-

Automatic pallet changer with 7 pallets total (5 in linear storage unit)

 

BLUM Laser tool length measuring and broken tool detection

 

RENISHAW infrared parts measuring probe

 

Clamping hydraulics for working table

 

Coolant tempering(Coolant is chilled & temp controlled for high accuracy)

 

SMOG HOG Oil and Emulsion mist separator

 

Optional high output chillers

 

Spray pistol with pump

PLUS STATE & LOCAL TAXES, IF APPLICABLE

AS IS WHERE IS, NO WARRANTY,SUBJECT TO

AVAILABILITY, AND TERMS AND CONDITIONS

Ask for De-Install Options etc.& Rigging and Trucking Quotes.

Subject to Prior sales,

specifications are subject to verifications by Buyer.

European Machine Tools

SHOP & SHOW ROOM

W300 N7672 Christine Lane # 600, Hartland 53029, Wisconsin U.S.A

SERVICE & SALES – SPECIALIST IN 5 AXIS MACHINE TOOLS

SALES & SERVICE PARTNER ALZMETALL GERMANY

EMTLLC@ATT.NET

Sales&Service Dir: 262-327-0800