1 Pre Owned Roeders RXP500DS 5Axis

1 Pre Owned Roeders RXP500DS 5Axis

Roeders RXP500DS 5Axis

Specifications
Manufacturer: Roeders RXP500 DS Status: SOLD
Location: EMT Hartland Spindle: 42000 RPM
Year: 2008 Number of Axis: 5
Inventory Number: 62216   
Features

1 Pre Owned ROEDERS MACHINING CENTER 5 AXIS RXP 500 DS

2008 ROEDERS RXP500DS High Speed 5-Axis Vertical Machining Center:
Machine built in Soltau, Germany in 2008;
first installed new in US 7/2008

BASE MACHINE, INCLUDING THE FOLLOWING–
Intel Pentium based Roeders High Speed CNC control RMS6

Work-piece table with M8/50mm grid
-Table: Machine table (9.8″ diameter) with M8 threads in a 50mm grid
X-axis integrated turn and swivel table,special direct drive torque motor
rotary drives with high stiffness and precision
-Swiveling range (A-axis): +/-95 degrees, max speed: 40 rpm
-Turning range (C-axis): 360 degrees, max speed: 80 rpm

Laser tool length measuring device
-For automatic tool length, diameter, custom taper and contour measurement
with breakage control
-Fully integrated into RMS6 CNC control
-Safely hidden in sealed tool changer compartment

Automatic tool cleaning station
-Compressed air-blast cleaning of cutting tool before laser measurement
-Tool moves to the cleaning station automatically when the CLEAN cycle is
programmed

Oil mist spray cooling system
-Lubricates tool with fine oil/air mist

CD-ROM Drive

Software for re-cutting partial programs
-Fully integrated into the NC milling simulation program

Fischer 3000 to 42,000 RPM spindle, type MFW1230/42
-19 hp (14.0 kW)
-Maximum tool diameter 0.625in (16mm)
-Includes converter, hydraulic system and oil/air lubrication
-Fully integrated into machine control
-Equipped for HSK E40 tool changer

Automatic tool changer-42 positions, Auto Door
-Rotary style unit includes collision detection and is accessible during
operation of the machine through a manually operated access door. The
automatic door can be used for tool change during production time by an
external handling device. *Note capacity is reduced to 41 positions when
the automatic 3-D probe is stored in the toolchanger.

Ethernet network card
-100 Mbps, Fiber-optic type of communication for minimal interference,
RJ45 converter with 110V power connection

NC milling simulation program
-Easy to use windows interface, runs directly on control
-Allows the operator to see graphically the cutter paths in 3D
-Features include: zoom, pan, marking of spline points, colored layout
of feed rates, any viewing angle, DXF and HPGL interface, calculation of
maximum travels

3D Touch Probe (Automatic) for automatic workpiece setup
-Reference pin included, fully integrated into control, data transmission
via IR-Interface

Telephone link (modem configuration)
-Communications software, (PC-Anywhere) for remote operation of the
Roeders RMS6 numerical control, which allows for faster diagnostics and
service

–MACHINE OPTIONS–
Machine table with integrated 3R Macro chuck
-The machine table is equipped with an integrated e R Macro chuck type
(3R-SP7359). This chuck has a minimum clamping force of 6000 N. The height
of the Z-reference elements of the chuck are located 1.06 inches (27 mm)
above the surface of the machine table

High Accuracy Package
-Measurement of spindle growth with non-contact sensor
-Control integration
-Cooling of spindle sleeve

Automation package (RXP500DS)
-Includes automatic door for robot loading and un-loading
-Includes DIO card for connection to an external loading system
-Includes Roeders Job Management (MRS44750)

Software Interface External handling II
-Includes software interface for connecting the Roeders machine control
(RMS6) to an external handling system from: System 3R, Erowa, Fanuc, and
Zimmer+Kreim
-Includes the following interfaces: Workpiece and toolholder changing is
possible with a single gripper and a double gripper

–MACHINE DESCRIPTION–
Work Envelope: In horizontal table position (table in 0 degree position)
X axis………………………………………….. 16.7″ (425 mm)
Y axis………………………………………….. 15.8″ (400 mm)
Z axis…………………………………………… 9.5″ (240 mm)

*The maximum Z height (with a 4.33 inch (110 mm) tool & toolholder
assembly) is 8.66 inch (220 mm) above the machine table without a chuck

Table Dimensions
Diameter: 9.8″ (250 mm)

Max. Workpiece Weight
132 lbs. (60 kg)

Axis Drive Motors
Linear Motors in all three axis, water cooled, torque motor direct drive
for A & C axis

Guideways
Deutsche Starr super precision linear guides with recirculating roller
bearings, standard cooling of bearings

Feedrates
0-1575 IPM (40M/min) on all 3 axes

Machine Weight
13,000 lbs. (6,000 kg)

Machine Dimensions (including control cabinet)
9′ wide, 8′ deep, 8′ high

Max. Ambient Temperature Allowed
95 degrees F

Sealing
All machine components are protected against contamination. With an
industrial vacuum cleaner, graphite, cast iron and plastic can be
machined

Enclosure
The machine is equipped with a full enclosure

Cooling
Chiller for tempering of the spindle, drives and cabinet

-CONTROL DESCRIPTION-
PC based control uses two Pentium 2.8 GHz level computers

15″ flat screen monitor

Control operates under Windows 2000 PRO

Easy to learn, user friendly Windows interface

256 Mbytes RAM (more RAM available on request)

80 Gigabyte hard drive (larger drives available on request)

Industry leading 10,000 block look ahead, less than 0.1 mil. sec. bp time

CNC control automatically assign best acceleration/deceleration based on
cutter path geometry

Standard CNC can control up to 5 axes simultaneously

PLC interface allows for easy connection of accessories

Software axis limit switches

Built in “post” postprocessor allows Roeders control to run CAM files
configured for other machines control formats without requiring
“reposting” for Roeders format

User can control which G and M codes to disregard when running part files

Machine history file stores ongoing machine history information: name of
file run, when it was run, total run time, error codes, etc.

Automatic 2D cutter radius compensation with collision detection

Automatic 3D cutter radius compensation (CAD file must give XYZ of tool
tip and tool vector)

Automatic sister tool function changes tools during operation (based in
cut distance)

Information are subject to verifications.
SUBJECT TO AVAILABILITY.
EMT Hartland
Feel free to call us if any questions or Visit us and see this Machine under Power.
European Machine Tools Wisconsin
262-327-0800 Sales