1 Pre – Owned VM-3 Haas in Stock Hartland Wisconsin.

VIDEOS : ON      YouTube

5 – Axis Simultan.

MFG: 2010  

High Speed Machining  with 5 Axis Simultan,

Programmable coolant nozzles

BIG LCD – SCREEN

Inline direct drive system .

X Axis……………………………………………   40″ (1016 mm)

Y Axis…………………………………………….   26″ (660 mm)

Z Axis…………………………………………….   25″ (635 mm)

Spindle Nose to Table (max)…………….   29″ (737 mm)

Spindle Nose to Table (min)…………….    4″ (102 mm)

TABLE

Length……………………………………………          54″ (1372 mm)

Width……………………………………………..          25″ (635 mm)

T-Slot Width…………………………………….          5/8″ (16 mm)

T-Slot Center Distance………………………..        3.937″ (100 mm)

Number of Std T-Slots…………………………….   13 in Y, 6 in X

Max Weight on Table (evenly distributed)…   4,000 lb (1814 kg)

SPINDLE

Max Rating………………………………………         30 hp (22.4 kW)

Max Speed……………………………………………   12,000 rpm

Max Torque…………………   90 ft-lb @ 2000 rpm (122 Nm @ 2000 rpm)

Drive System…………………………………   Inline Direct-Drive

Taper…………………………………………………..   CAT 40

FEEDRATES

Rapids on X………………………………..   710 in/min (18 m/min)

Rapids on Y………………………………..   710 in/min (18 m/min)

Rapids on Z………………………………..   710 in/min (18 m/min)

Max Cutting………………………………    500 in/min (12.7 m/min)

AXIS MOTORS

Max Thrust X…………………………………..   4100 lb (18238 N)

Max Thrust Y…………………………………..   4100 lb (18238 N)

Max Thrust Z…………………………………..   4100 lb (18238 N)

TOOL CHANGER

Type……………………………………………………..                 SMTC

Capacity………………………………………………….               40+1

Max Tool Diameter (adjacent empty)…………………..   5.0″ (127 mm)

Max Tool Diameter (full)…………………………….            3.0″ (76 mm)

Max Tool Length (from gage line)……………………..     13″ (330 mm)

Max Tool Weight…………………………………..                  12 lb (5.4 kg)

Tool-to-Tool (avg)………………………………………            2.8 sec

Chip-to-Chip (avg)………………………………………           3.6 sec

–GENERAL–

Air Required………………….   4 scfm, 100 psi (113 L/min, 6.9 bar)

Coolant Capacity………………………………….   55 gal (208 l)

–TR160 160 mm (6.3″) TILTING 2-AXIS TRUNNION ROTARY TABLE–

With scale feedback on the A (tilting axis)

PLATTER

Platter Diameter………………………………       6.3″ (160 mm)

Max Weight on Platter………………………..    80 lb (36.3 kg)

Part Swing Max……………………………….        17.5″ (445 mm)

Number of Std T-Slots………………………….   [email protected] 60 degrees

SPINDLE-A (TILT)

Max Speed…………………………   0.001 to 80 degrees/second

Max Torque……………………………….                150 ft-lb (203 Nm)

Backlash………………………………………..           30 arc-sec

Gear Ratio……………………………………………   63:1

Timing………………………………………………..    2:1

Brake Torque @100 psi/6.9 bar………………   200 ft-lb (271 Nm)

SPINDLE-B (ROTARY)

Max Speed…………………………   0.001 to 80 degrees/second

Max Torque……………………………….   100 ft-lb (136 Nm)

Runout Max……………………………….   0.0005″ (0.013 mm)

Backlash………………………………………..   30 arc-sec

Pilot Bore Dia. (through)……………………………..   1.500″

Gear Ratio……………………………………………   63:1

Timing………………………………………………..   2:1

Brake Torque @100 psi/6.9 bar………………   100 ft-lb (136 Nm)

INDEXING-A (TILT)

Max Rotation/Step……………………………….   120 degrees

Resolution……………………………………   0.001 degrees

Accuracy………………………………………..   15 arc-sec

Repeatability……………………………………   10 arc-sec

INDEXING-B (ROTARY)

Max Rotation/Step…………………………….   99.999 degrees

Resolution……………………………………   0.001 degrees

Accuracy………………………………………..   15 arc-sec

Repeatability……………………………………   10 arc-sec

GENERAL

Air Pressure Max…………………………..   120 psi (8.3 bar)

Operating Temp (max ambient)………   100 degrees F (38 degrees C)

Duty Cycle full/low speed……………………..   50/100 percent

Power Required-1-Axis Control…   115 VAC plus or minus 10 per @15

WEIGHT

Table………………………………………   425 lb (193 kg)

Brushless Control-1-Axis…………………….   14.2 lb (6.4 kg)

EQUIPPED WITH

SMTC-40-UP Side-Mount Tool Changer Upgrade, 40 taper, 40+1 tools

LS-2 Linear Scales

4AXD 4th-Axis Drive and Wiring for brushless-type rotary tables

5AXD 5th-Axis Drive and Wiring for brushless-type rotary tables

TR160 Tilting 2-Axis Trunnion Rotary Table

TSC50T Through-Spindle Coolant, 300 psi (21 bar)

WIPS-R Wireless Intuitive Probing System, Renishaw wireless tool-setting

(G54-G59 and G54.1 offsets 99 times)

Simultan 5 axis machining.

HAAS CNC-controller, lettering has conversational programming.

Hand wheel

Books water tank level shoes included .

Machine weight : Approx: 14650 LBS.

Condition : Excellent.

FOB EMT Wisconsin.

Technical information are subject to verification by buyer.

Subject to prior sales as is no warranty.

IN STOCK AT EUROPEAN MACHINE TOOLS.LLC HARTALAND WISCONSIN UNDER POWER.

VIDEOS,

Call: 262-327-0800

Dimensions Haas VM3 5 axis CNC

Approx:: machine

D :102 inch

W :123 inch

H  : 116 inch

Water tank : 82″ X 27 ” inch X 8 inch .