1 Pre Owned DMC125U Deckel Maho 5 Axis Mill-Plus Heidenhain

1 Pre Owned DMC125U Deckel Maho 5 Axis Mill-Plus Heidenhain

Manufacturer: Deckel Maho Status: Available
Spindle: 18,000 RPM Spindle Taper: HSK63A
Number of Axis: 5 Axis Inventory Number: 2102017
Tool Changer: 120   
Manufacturer: Deckel Maho Status: SOLD
Number of Axis: 5 AXIS   
Features

1 x Pre Owned 5-AXIS MACHINING CENTERS.

VIDEOS AND BALL-BAR TEST ON VIDEO AVAL.FROM EUROPEANMACHINETOOLS.

CALL……262-327-0800

DMG-DMC125U hi-dyn

Used  DECKEL MAHO DMG-DMC125U hi-dyn 5-AXIS UNIVERSAL MACHINING CENTER:

MFG:2001/2002 inst.

Made in Pfronten, Germany

This machine is capable of simultaneous 5-axis and 5-sided machining

because of the universal B-Axis swivel head which moves continuously

between vertical and horizontal spindle positions.

HEIDENHAIN Millplus CNC Control with electronic handwheel

-WORKING RANGE-

X axis (longitudinal)……………………………   49.2″ (1,250 mm)

Y axis (transverse)……………………………….   34.6″ (880 mm)

Z axis (vertical)…………………………………      31.5″ (800 mm)

-MAXIMUM WORKPIECE CONTOUR AND HEIGHT FROM TABLE SURFACE-

Maximum diameter………………………………..   49.2″ (1,250 mm)

Maximum height…………………………………   48.42″ (1,230 mm)

Maximum weight………………………………   3,307 lbs (1,500 kg)

-WORKING TABLE (2 PALLETS) NC ROTARY TABLE-

NC rotary table clamping surface…..   39.4″ x 31.5″ (1,000 mm x 800 mm)

NC rotary table maximum load………………….   3,307 lbs (1,500 kg)

Rotation range of table…………   360 x 0.001 degrees (full 4th axis)

**Has clamping hydraulics for working table**

 

-5TH AXIS MILLING SPINDLE-

NC Controlled B axis milling head. 4 seconds swivel time Horiz.-Vertical

Head swivels from horizontal to vertical & vertical to horizontal position

In addition head has a NC Controlled swivel range from vertical position

0 degrees to the left -7 degrees (in direction of tool magazine) and to

the right to horizontal position +180 degrees for 187 degrees total swivel

range

-MAIN SPINDLE DRIVE-

Type………………………………………   AC controlled/digital

Power 40% duty cycle (S3)…………………………   37.5 HP (28 kW)

Power 100% duty cycle (S1)………………………..   25.5 HP (19 kW)

Speed range (spindle)………………………………   20-18,000 rpm

Acceleration/Deceleration time………………………….   2 seconds

Maximum spindle torque………………………….   89 lb ft (121 Nm)

Spindle bearing diameter front/rear………….   3.15″/2.16″ (80/55 mm)

Spindle taper…………………………………………..   HSK-A63

Clamping power…………………………………………….   8 kN

-FEED DRIVES-

Type……………………………………….   Brushless AC/Digital

Feed rate………………………….   0.04-590 IPM (1-15,000 mm/min)

Rapid feed (x-y-z)…………………………..   1,574 IPM (40 m/min)

Acceleration (x-y-z)……………………………   4.5/3.5/6.0 m/s-2

Feed power (x-y-z)………………………………………..   10 kN

Ballscrews x/y/z…………………………….   50×20/40×20/40×20 mm

-120 POSITION TOOL CHANGER-

Number of pockets…………………………………………..   120

Maximum tool weight………………………………..   22 lb (10 kg)

Maximum tool diameter without free pockets…………..   3.94″ (100 mm)

Maximum tool diameter with free pockets………………   6.3″ (160 mm)

Maximum tool length………………………………   17.72″ (450 mm)

-COOLANT PUMP-

Pump output external jets………   10.6 gallon/minute (40 liter/minute)

Pump pressure external jets……………………   21.76 PSI (1.5 bar)

Pump output chip rinsing……..   47.55 gallon/minute (180 liter/minute)

Tank volume……………………………….   238 gallon (900 liter)

 

-COOLANT THRU THE SPINDLE; WITH COOLANT TEMPERING-

Pressure……………………………………….   580 PSI (40 bar)

Form………………………………………   Centre of the spindle

-WEIGHT-

Machine weight with table and pallet changer….   32,187 lbs (14,600 kg)

Load on machine base including 2 x workpiece weight   35,494 lbs (16,100 kg)

-EQUIPPED WITH-

Automatic pallet changer with 2 pallets total

BLUM Laser tool length measuring and broken tool detection

RENISHAW infrared parts measuring probe/Preparation only

Spray pistol with pump

Chip Conveyor

Subject  to Aval.as is no warranty.

FOB: Open Truck

Call EMT 262-327-0800