1 Pre Owned DECKEL MAHO DMU100P duo BLOCK 5-Axis Universal Machining Center

1 Pre Owned DECKEL MAHO DMU100P duo BLOCK 5-Axis Universal Machining Center

1 Pre Owned DECKEL MAHO DMU100P duo BLOCK 5-Axis Universal Machining Center

Specification
Manufacturer: Deckel Maho Number of Axis: 5 Axis
Model: 100P Control: TNC
Status: Available   
Features

1 Pre Owned DECKEL MAHO DMU100P duo BLOCK 5-Axis Universal Machining Center.

mfg/04/Inst/05

Low Hr.

With Heidenhain TNC and Heidenhain 410 Hand Wheel

Machine made in Pfronten, Germany

-WORKING RANGE-

X axis (longitudinal)……………………………   39.4″ (1,000 mm)

Y axis (transverse)……………………………..     39.4″ (1,000 mm)

Z axis (vertical)……………………………….        39.4″ (1,000 mm)

-MAXIMUM WORKPIECE DIMENSIONS-

Maximum workpiece diameter……………………….   49.2″ (1,250 mm)

Maximum workpiece height…………………………      62.2″ (1,580 mm)

Maximum workpiece weight……………………..          4,409 lbs (2,000 kg)

-NC ROTARY TABLE 4TH AXIS (C-AXIS)-

Clamping surface…   43.3″ diameter x 35.4″ (1,100 mm diameter x 900 mm)

Maximum table load (centered)…………………   4,400 lbs (2,000 kg)

Maximum torque (40% ED)…………………….   3,614 ft/lb (4,900 Nm)

Maximum holding momentum (40% ED)……………   3,614 ft/lb (4,900 Nm)

Rapid speed rotary axis (C-axis)…………………………..   30 rpm

1 x T-slot 18 H7 (alignment groove, table centre)

8 x T-slot 18 H12 (clamping grooves)

Distance between T-slots……………………………..   4″ (100 mm)

-NC CONTROLLED 5TH AXIS (UNIVERSAL MILLING HEAD, B-AXIS)-

B axis – NC controlled range up to 190 degrees. From vertical position

0 degrees to the left -10 degrees (in direction of tool magazine) and to

the right to horizontal position +180 degrees=3D190 degrees in total.

-MAIN DRIVE-

Type………………………………………   AC controlled/digital

Power 40% duty cycle (S3)…………………………..   47 hp

Spindle speed range………………………………..   20-18,000 rpm

Acceleration/Deceleration………………………………   2 seconds

Number of gear steps……………………………………….   None

Maximum spindle torque 40% duty cycle…………..   89.2 ft/lb (121 Nm)

Maximum spindle torque 100% duty cycle………….   60.48 ft/lb (82 Nm)

Spindle bearing diameter front………………………   3.15″ (80 mm)

Spindle bearing diameter rear……………………….   2.16″ (55 mm)

Spindle taper………………………………………….  CAT 40

-FEED DRIVES-

Type……………………………………….   Brushless AC/Digital

Feed rate (x-y-z)……………………………   2,362 ipm (60 m/min)

Rapid feed (x-y-z)…………………………..   2,362 ipm (60 m/min)

Acceleration (x-y-z)…………………………………   6/5/6 m/s-2

Feed power (x-y-z)…………………………………..   12/12/12 kN

Ball screw (x-y-z)…………………………………   40 mm x 20 mm

Magazine type……………………   Chain, horizontal, double gripper

Number of pockets……………………………………………   60

Maximum tool weight………………………………   33.1 lb (15 kg)

Maximum tool diameter with no neighbouring empty pockets   3.15″ (80 mm)

Maximum tool diameter with neighbouring empty pockets….   6.3″ (160 mm)

Maximum tool length……………………………….   19.7″ (500 mm)

-HEIDENHAIN GLASS SCALES X/Y/Z AXES DIRECT PATH MEASURING SYSTEM-

Input Resolution……………………………………….   0.001 mm

-HEIDENHAIN ROTARY ENCODERS B/C AXES DIRECT PATH MEASURING SYSTEM-

Input Resolution……………………………………….   0.001 mm

-EXTERNAL FLOOD COOLANT PUMP-

Pump output external jets pressure………………   21.7 PSI (1.5 bar)

Pump output external jets flow rate……   10.6 gallon/minute (40 l/min)

Coolant tank capacity………………………….   158 gallon (600 l)

-580 PSI COOLANT THRU THE SPINDLE CENTRE (FORM AD)-

Pump output………………………….   6.1 gallon/minute (23 l/min)

Pump pressure…………………………………..   580 PSI (40 bar)

-EQUIPPED WITH-

Fully enclosed protection cabin

Production Package consisting of:

-Coolant tank 158 gallon (600 l)

-Automatic coolant cleaning through paper band filter

-580 PSI (40 bar) coolant thru the spindle centre (Form AD)

-Chip conveyor with interval control

parts measuring probe TS Heidenhain

BLUM Laser tool measuring-tool length, diameter & broken tool detection

-Automatic retraction of the measuring unit in a protected housing.

-Tool length and diameter measuring in horizontal/vertical position.

Spray pistol with pump, 14.5 PSI/10.4 gallon/min pump performance

Subject to prior sales as is, feel free to call us.

Tech-info subject to verification

We can quote you de/& Install and trucking.

Also Install Feel free to call us we can Quote you all Options.

Thank you,

P: 262-327-0800