1 Pre Owned DECKEL MAHO DMGMORI-DMU100P duoBLOCK 5-Axis Machining Center:

1 Pre Owned DECKEL MAHO DMGMORI-DMU100P duoBLOCK 5-Axis Machining Center:

Specifications
Manufacturer: DMGMORI Inventory Number: 21020201
Number of Axis: 5 Axis Model: DMU100P D.B Deckel Maho
Control: TNC530 Heidenhain Tool Changer: 60 TC Posi.
Spindle: 18.000RPM Spindle Taper: 40 Taper
B Axis: B Axis C Axis: C Aixs
Features

1 Pre Owned DECKEL MAHO DMGMORI – DMU100P duoBLOCK 5-Axis Machining Center:

BJ:2004 / 2005 approx: 7200Hr,SP run time.

Machine made in Pfronten, Germany.

HEIDENHAIN iTNC 530 3-D control with 15″ TFT flat screen & handwheel

-WORKING RANGE-

X axis (longitudinal)……………………………     39.4″ (1,000 mm)

Y axis (transverse)……………………………..       39.4″ (1,000 mm)

Z axis (vertical)……………………………….           39.4″ (1,000 mm)

-MAXIMUM WORKPIECE DIMENSIONS-

Maximum workpiece diameter……………………….   49.2″ (1,250 mm)

Maximum workpiece height…………………………       62.2″ (1,580 mm)

Maximum workpiece weight……………………..          4,409 lbs (2,000 kg)

-NC ROTARY TABLE 4TH AXIS (C-AXIS)-

Clamping surface…   43.3″ diameter x 35.4″ (1,100 mm diameter x 900 mm)

Maximum table load (centered)…………………              4,400 lbs (2,000 kg)

Maximum torque (40% ED)…………………….                 3,614 ft/lb (4,900 Nm)

Maximum holding momentum (40% ED)……………    3,614 ft/lb (4,900 Nm)

Rapid speed rotary axis (C-axis)…………………………..   30 rpm

1 x T-slot 18 H7 (alignment groove, table centre)

8 x T-slot 18 H12 (clamping grooves)

Distance between T-slots……………………………..            4″ (100 mm)

 

-NC CONTROLLED 5TH AXIS (UNIVERSAL MILLING HEAD, B-AXIS)-

B axis – NC controlled range up to 197 degrees.  From vertical position

0 degrees to the left -17 degrees (in direction of tool magazine) and to

the right to horizontal position +197 degrees

-MAIN DRIVE-

Type………………………………………   AC controlled/digital

Power 40% duty cycle (S3)…………………………..         37 hp (28 kW)

Power 100% duty cycle (S1)………………………….        25 hp (19 kW)

Spindle speed range………………………………..              20-18,000 rpm

Acceleration/Deceleration…………………………….       2.2 seconds

Number of gear steps……………………………………….   None

Maximum spindle torque 40% duty cycle…………..    89.2 ft/lb (121 Nm)

Maximum spindle torque 100% duty cycle………….   60.48 ft/lb (82 Nm)

Spindle bearing diameter front………………………        3.15″ (80 mm)

Spindle bearing diameter rear……………………….        2.36″ (60 mm)

Spindle taper……………………………………………              CAT40 Taper

Tool clamping hydraulic/mechanical for draw bolt ISO/DIS 7388/II type B

-FEED DRIVES-

Type……………………………………….                       Brushless AC/Digital

Feed rate (x-y-z)……………………………                2,362 ipm (60 m/min)

Rapid feed (x-y-z)…………………………..              2,362 ipm (60 m/min)

Acceleration (x-y-z)…………………………………    6/5/6 m/s-2

Feed power (x-y-z)…………………………………..   12/12/12 kN

Ball screw (x-y-z)…………………………………        40 mm x 20 mm

-60 POSITION TOOL CHANGER-

Magazine type……………………   Chain, horizontal, double gripper

Number of pockets……………………………………………    60

Maximum tool weight………………………………               33.1 lb (15 kg)

Maximum tool length……………………………….              19.7″ (500 mm)

-HEIDENHAIN GLASS SCALES X/Y/Z AXES DIRECT PATH MEASURING SYSTEM-

Input Resolution……………………………………….   0.001 mm

-HEIDENHAIN ROTARY ENCODERS B/C AXES DIRECT PATH MEASURING SYSTEM-

Input Resolution……………………………………….   0.001 mm

-EXTERNAL FLOOD COOLANT PUMP-

Pump output external jets pressure………………   21.7 PSI (1.5 bar)

Pump output external jets flow rate……                10.6 gallon/minute (40 l/min)

Coolant tank capacity………………………….              158 gallon (600 l)

-580 PSI COOLANT THRU THE SPINDLE CENTRE (FORM AD)-

Pump output………………………….                 6.1 gallon/minute (23 l/min)

Pump pressure…………………………………..   580 PSI (40 bar)

 

-EQUIPPED WITH-

Fully enclosed protection cabin

Production Package consisting of:

-Coolant tank 158 gallon (600 l)

-Automatic coolant cleaning through paper band filter

-580 PSI (40 bar) coolant thru the spindle centre (Form AD)

-Chip conveyor with interval control

 

HEIDENHAIN PROBE

BLUM Laser tool measuring-tool length, diameter & broken tool detection

-Automatic retraction of the measuring unit in a protected housing.

-Tool length and diameter measuring in horizontal/vertical position.

P:262-327-0800

SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS

FOLLOWING, WE OFFER FOR YOUR CONSIDERATION

European Machine Tools

SHOP & SHOW ROOM

Hartland 53029, Wisconsin U.S.A

SPECIALIST IN 5 AXIS MACHINE TOOLS

 

Dir: 262-327-0800

European Machine Tools