1 Pre Owned 2013 +GF+ MIKRON HPM 450U 5-AXIS AUTOMATED MACHINING CENTER

1 Pre Owned 12/13 +GF+ MIKRON HPM 450U 5-AXIS AUTOMATED MACHINING CENTER

Specifications
Manufacturer: +GF+ MIKRON Inventory Number: 52319
Model: HPM450U Spindle Taper: HSK63A
Number of Axis: 5 Axis Tool Changer: 120
Spindle: 20.000 RPM   
Features

ONE USED 12/13 +GF+ MIKRON HPM 450U 5-AXIS AUTOMATED MACHINING CENTER:

Geometry Test aval.

Machine built in Nidau, Switzerland first installed new June of 2013

Has machined small high precision aerospace parts

Approximately 9,000 Program run hours over the life of the machine

Heidenhain iTNC 530 with Ethernet and electronic Hand-Wheel for part setup

-WORKING RANGE-

Longitudinal X-Axis                     23.62″ (600 mm)

Transverse Y-Axis                         17.72″ (450 mm)

Vertical Z-Axis                                17.72″ (450 mm)

-ROTARY TILTING TORQUE MOTOR TABLE-

Tilt, B-Axis                                     -120/+45 degrees

Rotary, C-Axis                                n x 360 degrees

Feed/Rapid Speed B-Axis            50 rpm

Feed/Rapid Speed C-Axis            140 rpm

Pallet Version    System 3R Dynafix 280 mm x 280 mm (11.02″ x 11.02″) Pallets

Maximum Weight On Table    150 kg (331 lbs) manual; 90 kg (198 lbs) automatic

Automatic Pallet Changer    7 Pallets capacity(No pallets come with machine)

Max pallet size possible for this machine    350 mm x 350 mm (13.8″ x 13.8″)

-FEED DRIVES-

Feed Rate X/Y/Z                               590 IPM (15 m/min)

Rapid Speed X/Y/Z                          866 IPM (22 m/min)

STEPTEC SWISS MADE SPINDLE-

Spindle taper…………………………………………..   HSK-A63

Spindle RPM………………………………………….     20,000 RPM

Spindle power……………………………………           40.2 HP (30 kW)

Spindle torque………………………………..               67.1 Ft/Lb (91 Nm)

-120 POSITION TOOL CHANGER TOWER-

Automatic Tool Changer………………………………   120 position

-EQUIPPED WITH-

Complete machine enclosure

Pallet changer Dynafix 280×280

Spindle chiller

Direct measuring system Heidenhain glass scales X/Y/Z, Encoders B,C

120 position tool changer

18-70 bar (261 PSI-1,015 PSI) Coolant Thru The Spindle

Paper band micro filter system 650 liter (172 gallon) capacity tank

BLUM laser tool measuring of tool length and diameter

M&H Infrared Parts Measuring Touch Probe

Lift-up Chip Conveyor

Spray Gun

Beacon

Blow-off unit for laser measuring system

All feed motors are liquid-cooled

Options:

Call for Trucking quote.

Ask for Install Quote.

MultiTap Transformer: $ 2.475.-

Feel free to call us .

P:262-327-0800

SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS

FOLLOWING, WE OFFER FOR YOUR CONSIDERATION

European Machine Tools

SHOP & SHOW ROOM

Hartland 53029, Wisconsin U.S.A

SPECIALIST IN 5 AXIS MACHINE TOOLS

Dir: 262-327-0800